天瑞克拉夫特 ‖ VM5230A 揭开面纱

发布时间:2017-05-26

天瑞克拉夫特 ‖ VM5230A 揭开面纱

640.webp

龙门式多面体加工中心VM5230特点

VM5230 Double column multi-axis machining center main characteristic:

640.webp (1)

1、VM5230配置摇摆头可实现空间任意角度平面和孔系加工。最适合加工汽车和各类模具、复杂形状大工件的强力切削直至高精度精加工的全过程。

VM5230 was equipping with swiveling head. It can machine any surface or hole from any angle.

640.webp (2)

2、X轴四轨交叉滑块布置,增强工作台承载,丝杠特殊支撑保证无悬垂。

The X axis has 4 roller type linear guide way, it can increase the loading ability of the worktable. A special ball screw support was design to eliminate any midair suspending.

640.webp (3)

3、横梁采用最合理的横竖筋与米字筋结合,有极佳的抗弯抗扭特性;Y轴3根滚柱线轨,8个加长滑块,布置合理;

The beam was designed with the most reasonable strengthen structure, it provide great bending and torsion structure. The Y axis has 3 roller type linear guide ways with 8 extra long slide blocks on each linear guide way.

640.webp (4)

4、Z轴行程1300或1500,配置4根滚柱线轨,12个滑块,对称布置,受力合理;

The Z axis’s travel can be 1300 or 1500. There are 4 roller type linear guide ways with 12 slide blocks on Z axis

640.webp (5)

5、自动交换头仓AHC,采用伺服马达和高精度滑轨定位,独立稳固,不占用加工空间;

The automatic head exchange storehouse use servo motor and high precision linear guide way for accurate positioning. The AHC system is independent from the machine structure; it will not occupy any working space.

640.webp (6)

6、主轴采用直联结构,转速高,振动小,扭力大。结构紧凑适合加工深腔类零件;

The spindle was direct driven; this kind of structure has many advantages, such as high speed, low vibration and high torque. This compact structure is suitable for deep cavity machining.

640.webp (7)

7、配海德汉高端控制器,彩色液晶大屏幕,可负载自我调整,操控便利;

Equipped with high end Heidenhain control system with large colored screen and LAC function, very easy to operate.

640.webp (8)

8、电气控制箱强弱电分开配置,杜绝干扰,增加可靠性和无故障工作时间。

The electric cabinet separates the strong and weak current apart; without any interference, the reliability increases thus the increase of non-fault working time.

返回